Gecko Glue™ Gold

Gecko Glue™ Gold is used to:

• Bond duct liner insulation to galvanized duct work
  • Ductmate PolyArmor™, elastomeric, or fiberglass insulation
• Seal cut edges of fiberglass insulation
• Bond kraft-backed foil covering to fiberglass
• Bond multiple layers of fibrous insulation board

Description

Gecko Glue™ Gold is a versatile, easy-to-use, premium water-based duct liner adhesive. Gecko Glue™ Gold works effectively using various application methods and dries faster than typical water-based adhesives to bond duct liner insulation with sheet metal.

Gecko Glue™ Gold can be sprayed and dripped on coil lines, roll-applied through roto-bonders, sprayed off line, and manually rolled or brushed on.

Special Characteristics

• UL GREENGUARD GOLD Certified
• UL Classified
• Solvent free water-based adhesive
• Spray, drip, roto-bond and manually apply
• Market leading wet tack with strong dry tack and smooth finish
• Exceptional coverage
• Excellent water resistance
• Mold and mildew resistant
• Non-flammable in wet and dry states
• Wipes clean with soapy water before fully cured
• LEED® Compliant, meets all applicable EPA Method 24 and CDPH standards
• Conforms to NFPA 90A and 90B requirements and SCAQMD standards

Technical Information:

Chemical Type:	Synthetic Latex
Color:	Black or White
Odor:	Minimal
VOC Content: EPA Method 24	Pass - Very Low
TVOC Emissions: CDPH Standard Method v1.1	Pass
ASTM C916: Adhesives for Duct Thermal Insulation Type II Classification	Pass
Density:	10.2 +/- 0.2 lbs per gallon
Solid Contents:	65% +/- 2%
Viscosity:	10,000 cP +/- 2,000 cP
Application Temperature:	35°F to 110°F
Storage Temperature:	35°F to 110°F
Dry Time:	8 minutes at 76°F Depending on temperature, humidity, and recommended coverage
Freeze Thaw Stability:	DO NOT FREEZE
Coverage:	Approximately 400 sq. ft./gal. Depending on application technique
Shelf Life:	1 year (unopened container)
Packaging:	Available in 5 or 54 gallons