PROtackTM
PROtack is a premium quality, water-based duct liner adhesive specifically formulated for spray and roller coating applications.
- Fire retardant
- Moisture resistant
- UL Classified
- Excellent wet tack
- Exceptional coverage
- Non cob-webbing
- Good open to dry time window
- Wipes clean with water
Directions for Use:
Can be applied by brush, roller, standard spray equipment, or roller coated. May be applied to either the galvanized steel or the fibrous insulation. All steel and/or foil surfaces should be free from all dirt, oil, and grease. For best results adhesive should not be thinned.
UNDERWRITERS LABORATORIES, INC.
CLASSIFIED ADHESIVE SURFACE BURNING CHARACTERISTICS
PROtack duct liner adhesive applied to inorganic reinforced board. Flame Spread 5 Smoke Developed 0 Tested as applied at a coverage of 14.7 sq. M/L. Flash point of liquid adhesive (closed cup), no flash to boiling. 52XF
SPECIFICATIONS
BASE | Synthetic Latex |
COLOR | Black |
SOLVENT | Water |
WEIGHT PER GAL | PROtack 9.8+.2 |
SOLIDS | PROtack 40+2% |
VISCOSITY | PROtack 1500 cps |
APPLICATION TEMP | 45 - 90 degrees |
STORAGE TEMP | 45 - 90 degrees |
OPEN TIME | Dependent on temperature, humidity, and application but generally 10-20 min. |
FLAMMABILITY | None |
FLASH POINT | No flash to boiling |
COVERAGE | Typical spray application may yield 400 sq. ft./gallon. |
SHELF LIFE | (Unopened containers) 1 year |
PACKAGING | Available in 1, 5, or 54 gallons |
Limited Product Warranty
Manufacturer is not liable for consequential, incidental, or special damages. There are no statutory or implied warranties including the warranties of fitness for a particular purpose and merchantability. There are no warranties other than as set forth below and factory neither assumes nor authorizes any person to assume any liability or other obligation in connection with PROtack.
PROtack is warranted to be free from any and all defects in material and workmanship at the time of shipment from our factory. If material is shown to be defective at the time of shipment from our factory, manufacturer will at its sole option, replace or issue credit for the original purchase price only. Manufacturer does not guarantee the results from the use of PROtack because of the extreme differences in surface textures of coated material and the possibility of structural movement or externally caused damages.
AVAILABILITY
All Ductmate products are available through its global manufacturing and distribution network.
|
|
  |
